SBIR and STTR topics › DoW/USAF
USAF
Open
SBIRITARCMMC Level 2 (Self)
High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing
Topic # DAF27BZ01-NV006 · DoW SBIR 2027 BAA · DoW/USAF · released 2026-10-07
Deadline
Nov 25, 2026
Closes in 7 days
DSIP topics appsearch DAF27BZ01-NV006 there
No SBIR.gov page at the momentEmail me topics like this
Requirements to bid
CMMC Level 2 (Self)
Protection of Controlled Unclassified Information: the 110 requirements of NIST SP 800-171 Rev. 2. "Self" means you assess yourself every three years; "C3PAO" means an accredited third-party assessor certifies you every three years. Both need a yearly affirmation.
ITAR The work is export-controlled, which restricts who may work on it
(foreign nationals need authorisation).
A summary, not advice: the solicitation and 32 CFR Part 170 govern.
Keywords: Temperature Measurement, Emissivity, Hyperspectral Imager, High Enthalpy Ground Testing, Hypersonics, Materials
Technology areas: Materials, Nuclear, Weapons
Objective
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
Accurately measure material surface temperature at high speed (5000 Hz +) and low range (0-2000 F) in high enthalpy ground test facilities.
Description
AEDC requires a method to resolve temperature and emissivity across the surface of test articles. Specifically, there is a need for a high-speed low-temperature measurement solution that overlaps with other higher-temperature capabilities. The solution threshold requirements are to measure surface temperature from 0-1500 F (2000 F objective), at 4000 Hz (5000 Hz objective), with a pixel footprint of at most 0.1 inch (0.05 inch objective) and an accuracy of +/- 10 deg F (+/- 5 deg F objective).
Phase I
Compile low temperature, high sampling rate hyperspectral imager feasibility research that Addresses the solution threshold included in the Description of this topic. Awardee will perform research and present a feasibility report that describes a benchtop proof-of-concept that will be used for fabrication activities during Phase II.
Phase II
Fabricate a well-defined prototype of a low temperature, high sampling rate hyperspecral imager that meets the objectives stated above and can become operationally viable.
Phase III / dual use
Hyperspectral imager deployment.
References
- References relating to hyperspectral imaging used to measure the surface temperature and emissivity of various materials: 1. https://pmc.ncbi.nlm.nih.gov/articles/PMC9920743/
- https://www.sciencedirect.com/science/article/pii/S2214157X21003178
- https://opg.optica.org/oe/fulltext.cfm?uri=oe-30-2-2186
- https://www.aps.anl.gov/APS-Science-Highlight/2026-07-09/hyperspectral-imaging-improves-temperature-measurements-in-laser
- https://voljournals.utk.edu/utk_gradthes/11797/ 6. https://www.osti.gov/servlets/purl/1644750
Copied from the official source and may be out of date. Confirm dates and requirements in the
official solicitation.