SBIR and STTR topics › DoW/USAF
USAF
Open
SBIRCMMC Level 2 (Self)
Luminescence-Based Surface Measurement Technique for Simultaneous Pressure and Temperature Measurements within Non-Oxygen Based Hypersonic Ground Test Facilities
Topic # DAF27BZ01-NV005 · DoW SBIR 2027 BAA · DoW/USAF · released 2026-10-07
Deadline
Nov 25, 2026
Closes in 7 days
DSIP topics appsearch DAF27BZ01-NV005 there No SBIR.gov page at the momentEmail me topics like this
Requirements to bid
CMMC Level 2 (Self) Protection of Controlled Unclassified Information: the 110 requirements of NIST SP 800-171 Rev. 2. "Self" means you assess yourself every three years; "C3PAO" means an accredited third-party assessor certifies you every three years. Both need a yearly affirmation.
A summary, not advice: the solicitation and 32 CFR Part 170 govern.
Keywords: hypersonic, instrumentation, non-intrusive, wind-tunnel
Technology areas: Sensors
Objective
Develop and validate a non-intrusive, luminescence-based surface measurement technique for simultaneous pressure and temperature measurements within non-oxygen-based hypersonic ground test facilities.
Description
Within aerodynamic testing, pressure sensitive paint (PSP) provides crucial global surface pressure data that is utilized in calculating aerodynamic loads [1] and identifying small scale features within the flow. The working principle behind PSP involves luminophores that fluoresce at an intensity inversely proportional to the number of oxygen molecules present i.e., oxygen quenching [2].
While these paints/luminophores have been sufficiently researched, the use-case of these paints is severely limited due to the requirement of oxygen in the flow field. Advanced hypersonic wind tunnels such as the blowdown facility at AEDC Tunnel No. 9 which utilizes nitrogen as the working fluid, are unable to utilize PSP to capture global pressure data with this method and are therefore severely limited to discrete measurement techniques. It is required that a novel technique be developed to capture simultaneous global pressure and temperature measurements in nonoxygen-based hypersonic wind tunnels.
Phase I
Phase I efforts outline technique/paint development and establish feasibility through thorough characterization of the paint properties/sensitivities and reduction process using benchtop testing and testing within small-scale (educational) supersonic/hypersonic facilities.
Phase II
Phase II efforts outline full scale prototype demonstrations within a hypersonic test facility through either test probes or full-scale model testing on a well-known/standard test article. The completed technique and refined data reduction process will be delivered at this phase.
Phase III / dual use
The technique can be marketed for non-intrusive simultaneous pressure/temperature measurements in non-oxygen-based high-speed wind tunnels.
References
- Gregory, J. W., Asai, K., Kameda, M., Liu, T., & Sullivan, J. P. (2008). A review of pressure-sensitive paint for high-speed and unsteady aerodynamics. Proceedings of the institution of mechanical engineers, part G: journal of aerospace engineering, 222(2), 249-290.
- Sellers, M. E. (2000, June). Application of pressure sensitive paint for determining aerodynamic loads on a scale model of the F-16C. In 21st aerodynamic measurement technology and ground testing conference (p. 2528).
Copied from the official source and may be out of date. Confirm dates and requirements in the official solicitation.