SBIR Topic Watch

SBIR and STTR topics › DoW/OSD

OSD Pre-release STTRCMMC Level 1

Wafer-scale low-loss hyperbolic optical material

Topic # OSW27TZ02-NV001 · DoW STTR 2027 BAA · DoW/OSD · released 2026-11-04
Opens Dec 2, 2026 Opens in 14 dayscloses Jan 6, 2027

DSIP topics appsearch OSW27TZ02-NV001 there SBIR.gov page Email me topics like this

Requirements to bid

CMMC Level 1 Basic protection of Federal Contract Information: the 15 requirements of FAR 52.204-21. You assess yourself every year and post the result in SPRS.

A summary, not advice: the solicitation and 32 CFR Part 170 govern.

TPOC: Jeffery Allen <[email protected]>; Monica Allen <[email protected]>

Keywords: Hyperbolic materials; Subdiffractional optics; Integrated photonics; Nanolithography; Metrology; Quantum emitters; Wafer scale.

Technology areas: Electronics, Sensors

Objective

The overall goal of the R&D effort is to develop wafer-scale, fabrication-ready thin films of a low-loss naturally hyperbolic optical material that operates across the visible to telecommunication wavelength range. Films should be of high optical and crystalline quality, with controlled thickness and orientation, on substrates at least one inch in cross-sectional diameter.

Description

Conventional optical systems are limited by diffraction, which sets the smallest features they can pattern, image, or confine to roughly the wavelength of the light used. A class of strongly anisotropic, or "hyperbolic," optical materials can confine and route light far below this limit, enabling a family of compact, low size-weight-and-power photonic components of direct interest to OUSW (R&E). Hyperbolic behavior has historically been realized in artificial metamaterials, which are optically lossy, and difficult to fabricate and scale. Certain naturally occurring crystals exhibit the same behavior with far lower loss, but the available examples operate only in the infrared and have been produced only as small, research-grade crystals by batch methods incompatible with standard microfabrication. There is presently no commercial source of wafer-scale, low-loss hyperbolic material that operates at visible and telecommunication wavelengths in a form compatible with standard semiconductor fabrication, and it is important for the Air Force to establish a domestic supply source for such a material.

Phase I

Establish the feasibility of producing the hyperbolic material as wafer-scale, device-grade thin films with the required optical quality and crystalline orientation across the target wavelength range. Characterize and/or predict the optical performance of the films and benchmark it against existing artificial metamaterial approaches. Identify a viable approach for lithographically patterning and integrating the material. As a Small Business Technology Transfer (STTR) effort, the work must be performed in partnership with a research institution; a partner with established expertise in optical measurement of hyperbolic materials is encouraged. Deliverables include a feasibility assessment with supporting analysis and/or preliminary data, quantitative performance projections, and a detailed Phase II plan. Documentation may comprise technical reports, peer-reviewed publications, measured data, and design artifacts sufficient to substantiate the scientific, technical, and commercial merit required to enter Phase II.

Phase II

Deliver wafer-scale films/wafers (at least one inch in cross-section, with a demonstrated path to larger wafers) of the low-loss hyperbolic material, with controlled thickness, orientation, and uniformity, reproducibly and with reasonable yield. Demonstrate lithographic patterning and integration of the material. Provide quantitative performance data benchmarked against incumbent approaches, together with a manufacturing-readiness and transition plan.

Phase III / dual use

The awardee will pursue commercialization of the technologies developed in Phase II, transitioning expanded capability to government and civilian users to microelectronics fabrication and inspection, compact optics and photonics, and/or quantum light sources. Direct access to end-users and government customers will be provided, with opportunities for Phase III awards for additional research and development or direct procurement of the products and services developed in coordination with the program. Phase III efforts are intended to transition technologies developed with further scaling of performance metrics for dual use applications into operational use and/or commercial markets, leveraging non-SBIR/STTR funding. Phase III work may include productization, integration, certification, and large-scale deployment of the capability developed in Phases I and II. By effectively executing Phase III effort and transitioning the technology into operational and commercial use, the project aims to maximize the impact and value of the STTR-funded R&D efforts, ultimately contributing to national security, economic growth, and technological innovation. A design for performance approach for defense system in partnership with a defense contractor and a design for cost for commercial applications will be planned.

References

  1. A. Poddubny, I. Iorsh, P. Belov, Y. Kivshar, "Hyperbolic metamaterials," Nature Photonics 7, 948–957 (2013).
  2. C. Liu, T. Liu, Z. Zhang, Z. Sun, G. Zhang, E. Wang, K. Liu, "Understanding epitaxial growth of two-dimensional materials and their homostructures," Nature Nanotechnology 19, 907–918 (2024).

Copied from the official source and may be out of date. Confirm dates and requirements in the official solicitation.